Sand filter pump 200 W 25 L 385x620x432 mm blue and black

This filter pump is suitable for both sand and filter balls. It is a good choice for keeping your pools and spas clean without additives or chemicals.

The filter pump is based on a natural filtration system: the water is pumped into a tank containing silica sand, which absorbs impurities and particles, producing clean water. The strainer basket in front of the filter is an added mechanism that captures larger particles such as leaves, hair and dirt. It also protects your pump's impeller and helps the pump keep running smoothly.

This filter pump has a 7 position valve, which can be adjusted to different settings for filtering pool water, closing (stopping the water flow), backwashing (to clean the sand bed), rinsing (for first time set up, cleaning and sand bed leveling). ), draining water from the pool, circulating the pool water and winterizing for off-season storage. Thanks to the reinforced plastic housing, this swimming pool filter pump can be used in all weather conditions and has a long lifespan.

Please note: sand or filter balls are not included in the delivery

• Colour: blue and black
• Material: plastic
• Dimensions: 385 x 620 x 432 mm (W x D x H)
• Power supply: 230 V~, 50 Hz
• Power: 200 W
• Pump capacity: 6,000 L/h
• Flow rate (sand): 4,000 L/h
• Flow rate (Aqualoon): 4,600 L/h
• Reservoir capacity: 25 L
• Bucket diameter: maximum 385 mm
• IP level: IP5
• Maximum working pressure: 1.5 bar
• Suitable water temperature: 0 - 35 °C
• With pre-filter
• Filtration area: 0.13 m²
• Requires 15kg sand or 700g filter balls (not included)
• 7-way valve: filter, flush, circulate, backwash, close, drain, winterize
• Suitable for hoses with a diameter of 32 mm or 38 mm
• Suitable for above-ground swimming pools (e.g. from the Intex and Bestway brands)
• Assembly required